Thermoelectric Cooling Solutions

site map eng | ru

Print version


Jun 18, 2019

   RMT has established a new structural unit the 3-d additional laboratory.

   Previously there were 2 laboratories in RMT: laboratory of outgoing inspection, which carries out 100% lot-to-lot control of products, and testing laboratory, whose main task is to carry out periodic, typical and qualification tests of RMT products and thermoelectric materials to confirm their compliance with the requirements of the international standards (i.e. Telcordia GR-468-CORE, MIL-STD-883K and others) and RMT internal specifications (TU 8420-001-34609988-16 Technical conditions on TECs and TU 7911-001-34609988-15 Thermoelectric materials).

   Now new laboratory is established in RMT: an analytical laboratory. Its mission is to carry out studies on the TECs and components, as well as to strengthen control over the implementation of RMT technological processes. For this, the analytical laboratory has the following equipment:

·       X-Ray Fluorescence Spectrometer FISCHERSCOPE X-RAY XDV-SDD (mfr. Fischer);

·       Scanning Electron Microscope Hitachi SU1510 (mfr. Hitachi);

·       Optical microscope Axio Imager A2m (mfr. Carl Zeiss);

·       Scanning Acoustic Microscope SAM 300 (mfr. PVA TePla Analytical Systems);

·       Thermal Imaging System FLIR SC325 (mfr. FLIR Systems);

·       CNC Vision Measuring System Quick Vision Active 404 (mfr. Mitutoyo).

   Using this equipment, the analytical laboratory will be able to carry out such studies as:

ü  Composition of materials, including thermoelectric materials, metal layers and chemical solutions;

ü  Measuring of metal layers thickness;

ü  High resolution imaging of RMT products and components;

ü  Studies of soldered joints quality in TECs and sub-mounts;

ü  Studies of  heating and cooling rates and temperature distribution uniformity in TECs;

ü  Fast and accurate incoming inspection of components.

   Thus, RMT now has 3 laboratories whose activities are aimed at checking and confirming the quality and reliability of RMT components, technological processes and products, because quality and reliability are fundamental key components of RMT Company’s strategy of development and success!

Back to Company News