Thermoelectric Cooling Solutions

MP Series of Single & Multistage TE Modules

MP SERIES

The series of two-stage TE modules has been designed for applications where a relatively large cold side is required as well as two-stage level cooling.

  • Modules of the series have equivalent cold and hot sides.
  • Cascade connection combines series and parallel.

MP Series consists of two sub-series - MP04 and MP06. The difference is in cross-section of thermoelectric pellets. MP04 sub-series has pellets of 0.4x0.4 mm2 cross-section; MP06 - more powered sub-series - 0.6x0.6 mm2.

2MP06 TWO-STAGE MODULES

The 2MP06 Series of two stage TE modules consists of the following types:

2MP06-012 2MP06-032 2MP06-096
2MP06-018 2MP06-060  

SPECIFICATIONS

2MP06 Type DTmax
K
Qmax
W
Imax
A
Umax
V
AC R
Ohm
H
mm
A
mm
B
mm
C
mm
D
mm
Data Sheet
2MP06-012-xx (N=12)
2MP06-012-1005 92 0.68 3.7 0.60 0.13 3.2 4.0 4.0 4.0 4.0 2MP06012
2MP06-012-1205 95 0.63 3.7 0.63 0.14 3.4
2MP06-012-1505 98 0.55 3.7 0.66 0.14 3.7
2MP06-018-xx (N=18)
2MP06-018-1005 91 1.02 3.6 0.84 0.19 3.2 5.0 5.0 5.0 5.0 2MP06018
2MP06-018-1505 94 0.89 3.6 0.90 0.20 3.4
2MP06-018-1505 98 0.83 3.6 0.95 0.21 3.7
2MP06-032-xx (N=32)
2MP06-032-1005 92 1.81 3.7 1.63 0.36 3.2 6.0 6.0 6.0 6.0 2MP06032
2MP06-032-1205 95 1.64 3.7 1.70 0.37 3.4
2MP06-032-1505 98 1.46 3.7 1.79 0.39 3.7
2MP06-060-xx (N=60)
2MP06-060-1005 91 3.38 3.6 2.98 0.66 3.2 8.0 8.0 8.0 8.0 2MP06060
2MP06-060-1205 95 3.09 3.7 3.13 0.69 3.4
2MP06-060-1505 98 2.74 3.7 3.30 0.72 3.7
2MP06-096-xx (N=96)
2MP06-096-1005 91 5.35 3.6 4.67 1.05 3.2 10.0 10.0 10.0 10.0 2MP06096
2MP06-096-1205 94 4.94 3.6 4.92 1.09 3.4
2MP06-096-1505 97 4.35 3.7 5.20 1.14 3.7

Note: Performance data shown in specifications are given for Th=300 K, vacuum.

Options

  1. TEC Assempling
    1. Solder SNSb (Tmelt=230°C)
    2. Solder PbSn (Tmelt=183°C)
  2. Ceramics
    1. Pure Alumnia 100%
    2. Alumina 96%
    3. Aluminum Nitride (AIN)
  1. Surface finish
    1. Clear ceramics
    2. Metallized Ni (Ni/Sn(Bi))
    3. Metallized Au
  2. Pretinning
    1. Rose alloy (PbSnBi, Tmelt=94°C)
    2. Solder 117 (InSn, Tmelt=117°C)
    3. Solder 138 (SnBi, Tmelt=138°C)
    4. Solder 157 (In, Tmelt=157°C)
    5. Solder 183 (PbSn, Tmelt=183°C)
    6. Solder 199 (SnZn, Tmelt=199°C)
  1. Protective coating
    1. Parylene coating (10-15 mm thickness)
  1. Thermosensor
    1. NTC Glass beaded

Information furnished by RMT Ltd is believed to be reliable. However no responsibility is assumed for possible inaccuracies or omission. Specifications are subject to change whithout notice.